Back patios and seating areas
A patio is the slab you sit on and look at most, so it's where a pattern pays off. Stone and tile looks fit most shapes, and a border can frame the seating area.
Stamped concrete services in Prattville AL - a patterned slab built on a solid base
Want your patio or walk to look like stone, brick or wood plank? We pour a sound slab, stamp it evenly and seal it.
- Licensed and insured.
- Free estimates at your property.
- Replies within 1 business day.
What stamped concrete is and what drives the price
Our stamped concrete services in Prattville, AL turn a plain poured slab into a patio, walk or pool deck that looks like stone, brick, wood plank or tile. We color the concrete, press rubber pattern mats into it while it's still soft, then seal it, and underneath it's the same slab as any plain patio.
The price moves with the size, the pattern, how many colors and which color method you pick, how much digging and packing the base needs, and whether the slab gets rebar, the steel inside that holds it together, which adds a little per square foot. The schedule turns on the permit check, a day that's dry and not too hot for stamping, and curing, the days the concrete needs to harden before it carries weight. I'll measure it on site, and the estimate gives you your own number.
We're based in Prattville and also work in Montgomery, Millbrook, Wetumpka, Pike Road, Clanton, Holtville and plenty of other cities around them. Before we set a date, we find out which office covers your address, like the City of Prattville or the Town of Pike Road, and if your job needs a permit we handle the application or walk you through it and don't start ahead of it.
I measure it and run it
I come out to see the spot and measure it myself, then I'm on site running the work with my crew, so the person who priced your patio is the one watching the pour.
Straight answers before you spend
We'll tell you what stamped concrete will and won't do in your space, including where it's likely to crack and how much upkeep the sealer takes, before you decide anything.
Full time since 2013
I started pouring sidewalks and small slabs for neighbors on weekends and went full time in 2013, and most of our calls still come from homeowners around Prattville.
How we build and stamp the slab
A stamped pattern is only as good as the plain slab under it, so that's where we start. We dig out the soft ground and pack the subgrade, the dirt and gravel the slab sits on, because a base that's only raked level settles and takes your pattern down with it. We also check where the water runs and set the slab to fall away from your house, then add rebar where the job calls for it. This is the part you won't see on day one and the first thing people want to trim from a budget, and it's the one place I won't cut, since no pattern hides a slab that's sinking.
Before the pour, we go over the color method and the sealer with you, and where the surface gets wet, like a pool deck or a shaded walk, we add grip to the sealer because a glossy finish gets slick. On pour day we stamp in sections while the concrete is still soft, since it only takes a clean print for a short while and a hot afternoon closes that window fast. Stamped concrete cracks for the same reasons any slab does, so we cut control joints, planned lines where the slab can crack out of sight, and hide them in the pattern lines.
Stamped work usually sits next to plain concrete, and we pour that too. We build concrete sidewalks with a broom finish, a light brushed texture for grip, and garage floor concrete on the same packed base, so if your project runs from the patio to the walk or up to the garage, we plan the heights and joints together.
Where stamped concrete works around your house
Front walks and entries
A brick or stone pattern on the front walk can tie it to the house, and we set the slope so rain runs off it instead of pooling at the door.
Pool decks
A pool deck is wet from splashing and bare feet all season, so it's the place the added grip in the sealer matters most. We settle the pattern, color and sealer before the pour.
Driveways and parking pads
A stamped driveway takes tires turning and the odd oil drip, so the color method matters more here than on a patio. The question below on color covers the trade-off.
Get a stamped concrete estimate at your property
Send the form and we'll get back to you within one business day to set a time. I'll come out to look at the spot, and the estimate is free with no obligation.
The rough size of the area
A rough length and width is plenty for now, since size is a big part of the price and tells me what to bring when I come out to measure.
What the slab is for
Tell us if it's a patio, walk, pool deck or drive, because that steers the color method, the base work and whether the sealer needs grip.
A few photos of the spot
Pictures of the ground, any old slab and what's around it show me the slope and access ahead of time, so the visit can go to pattern and color.
Concrete patterns, colors and finishes to compare
Examples of stone, brick, wood plank and tile patterns, color choices and layouts we can talk through when I come out to measure.
Questions about stamped concrete around Prattville
Here's what people ask most before they pick a pattern, from what a patio runs to when you can walk on it.
How much does a stamped concrete patio cost near Prattville, AL?
A stamped concrete patio in the Montgomery, Alabama area usually costs about $8 to $16 per square foot, and that's the going rate around here, not our price. Where yours lands depends on the pattern, the colors, rebar and how much base work the spot needs. I'll measure yours on site for your own number.
Which stamped concrete color method is best for a driveway?
Color hardener is the common driveway choice, because it gives richer color and a harder surface to take wear. The trade-off is that deep damage shows the gray concrete underneath. Integral color runs all the way through, so a chip or saw cut matches the top, but its tones stay softer. With hardener, ask any crew how they spread it, since uneven work comes out blotchy.
How often does stamped concrete need to be resealed?
Reseal when the slab shows it needs it, which one guide puts at every 2 to 5 years for most slabs. Trade guidance says to watch for water and stains soaking in instead of staying on top, and for the color going dull. Resealing more often than that builds up on the surface, and that buildup is expensive to remove.
How long before I can walk or drive on new stamped concrete?
Once it's sealed, one sealing guide says to keep foot traffic off for at least 12 hours and cars off for 48 to 72 hours. That wait is for the sealer. The concrete also needs its curing time, and I'll lay out both for your job when we set the date.
Do I need a permit for a stamped concrete patio in Prattville?
The city's permit list doesn't answer that for stamped concrete, so we check with the office before we schedule. Prattville's Building Division takes permit requests, and its list names outbuildings, additions, renovations, fences, manufactured homes and new houses. If you're applying yourself, its forms can be filled in on screen, printed and brought to the City Hall Annex at 102 West Main Street.
Does a concrete contractor need a license in Alabama for a stamped patio?
Yes, when the job costs more than $10,000. Alabama's Home Builders Licensure Board licenses residential builders each year, and its law covers paid improvements to a home over that amount. If you claim the homeowner exemption, a subcontractor you hire needs a license once their part tops $10,000, and paying someone to supervise means you're not your own contractor. We're licensed and insured.
Concrete work that pairs with a stamped slab
Call or send the form for your estimate
Our hours run 6 AM to 11 PM every day, so you can call (334) 788-0315 after work or send the form any time.